Improve Adhesion to Shiny Surfaces
Available in Three Sizes: 8 oz, 16 oz & 32 oz
Improve adhesion to shiny surfaces with Slick Stick! for Glass, Laminate or High Gloss surfaces, use Slick Stick prior to painting your piece. Slick Stick improves the adhesion to shiny surfaces.
First Clean your piece with Dixie Belles White Lighting. Then apply a coat of Silk Stick. For best results allow your piece to dry and set for three hours. Then apply a second coat. Allow it to dry again for a few hours. Once dry, you are ready to paint your piece!
$15.50 – $37.50
Preparation for painting your piece is generally pretty easy – Clean your piece with White Lighting and paint! Occasionally you will run into pieces that require some additional preparation as follows:
BOSS: When you need a oder blocker, stain blocker or you think you might get bleed through on your piece. Sometimes with whites and light colors on dark stains or unfinished pine pieces, you might encounter bleed thru issues. If you think that this is a potential issue with your piece, we recommend testing it by painting a small area. If you encounter any bleed through then use BOSS first.
Slick Stick: For very shiny surfaces such as glass or laminate surfaces or very glossy finished surfaces, we recommend applying Slick Stick first to improve the adhesion to these surfaces.
When done painting for the day, reach for some scrubby soap! Great for removing the paint from your hands and fingernails!